In the Livestock Buildings section for agricultural/livestock work, Pujol Group has its products in the next groups:


In each of them will find an explanation for its functionality as well as any or some of its most important and representative features.


For any further questions please contact with us in the contact section of this website.


However, if what they want is technical information about the pieces of the same group and ask us for a username and password to access this section.


Variable depth beams

Variable depth beams can be manufactured in reinforced or prestressed concrete, depending on the calculated spans and loads required. These beams can be either “T” or “I” beams, and can also be specified based on the lengths to span and the loads to be supported.


We can manufacture the following types of units, classified according to “T” and “I” beams:


'T' beams
RIOSTRA CENTRAL R-50
(CENTRAL BRACE)
RIOSTRA CENTRAL R-65
(CENTRAL BRACE)
Particularly well suited as a girt beam for structure facades and wall panel support. Slopes of 10 and 12%, and lengths up to 11.50 m.
TAUVERThese beams use a T profile across their entire length, with a 12% slope, used as primary beams in roofing structures. They are suitable for industrial buildings, with up to 7.50 m separation between units, under light load conditions. Spans up to 16.00 m.
DOVERThese beams use an I profile across their entire length, with a 12% slope, and are used as primary beams in roofing structures. They are suitable for industrial buildings, with up to 12.50 m separation between units. Spans up to 17.00 m.
STYLT-profile reinforced concrete product with a slope greater than 25% and less than 18%, used as primary beams in roofing structures. Its unique shape is suitable for buildings that require a great deal of additional interior space. Separations between units up to 7.50, maximum spans up to 16.00 m.
JUMBO ENTRY PORTICOThis is a reinforced concrete product with a rectangular column and a 'T' profile along the roofline, with a 25% slope. This product is especially suitable for handling structural needs in livestock operations, when used together with roof purlins. Separations between units can be up to 7.50, maximum spans up to 22.00 m.

'I' beams
PERALTADA
(CAMBERED GIRDER)
This is an I-shaped product manufactured out of reinforced or prestressed concrete, ideal for two-pitch roofing structures This product is very slim and has structural capabilities that allow it to span openings of up to 45.00 m. Depending on the loads required and the length of the pieces, we can manufacture it in the following models:
  • B - 36: Slope of 10%, and total length up to 20.00 m.
  • I - 40: Slope of 10%, and total length up to 29.00 m.
  • I - 60: Slope of 10%, and total length up to 36.00 m.


Technical information login

Images